Canon i-SENSYS MF4540 Firmware - This Up-date for improvement the error, in a problem that is not often, lead characters are displayed so more than usual.
Realise Firmware: July 28, 2011
"You will be prompted to enter the product serial number in the plan to download the firmware. The serial number is usually located on the rear side of the printer."
"In the case where the fax communications become inoperable, the image copy / print turned to the left, or E196-2000 displayed on the LCD, please do the following procedure after updating the system software MF printer.
Wish noted that this system wipe all user data. Be sure to set the Address Book data, Data Dial One-Touch, a phone number that is often used, and others again.
To update the firmware versus just watch UST user (User Support Tool operating procedures). The procedure to be followed after the update:
1. Turn off the main capabilities of the printer MF.
2. While choke the Address Book button, turn on the ultimate capabilities of the printer MF.
3. On the monitor drafting Region, specify "" EUROPEAN "".
4. In preparation monitor bhs, specify "" English "".
5. Follow the instructions displayed on the LCD as well as checking package materials, toner cartridge, and paper, as well as taking the decision date and time.
6. Set the Address Book data, Data Dial One-Touch, a phone number that is often used, etc.
One serious mistake can take place if another computer or application communicates with the printer (for example, to print) middle firmware updated shortly. Do not turn off the printer or release a USB cable or LAN cable being refurbished central firmware.
In a plan to avoid errors: Connect the printer either use a USB cable or a LAN cable only (no cable connecting 2nd). (The USB cable is not affected by the referenced because another computer.) Free the telephone cord from the printer to avoid disturbing faxes from up-date firmware. When connecting the printer with a USB cable, do not connect the cable via a USB hub can lead to errors because of the connection. When the printer is associated with a LAN cable, do not do print, and others are being refurbished central firmware. printer will require service when critical errors, such as the printer does not start after the main electricity has been switched ON, took place.
Firmware and instruction files have been compressed. The guides show you the steps to download the compressed files and decompress them.
1. To download a file, click the file link, click Accept & Download, and then input printer serial number to initiate the download file.
2. Files are stored on your computer desktop.
3. Click 2 x file to mount the Disk Image.
4. Click 2 x Disk Image installed.
5. Click 2 x Installer file in the folder. Installation begins with automated manner.
6. Open the compressed PDF file. Follow this PDF instruction to start up-date firmware.
Operating System Compatibility
Mac OS X 10. 6 / Mac OS X 10. 5 / Mac OS X 10. 4
This firmware includes all first correction and improvement. Correcting these circumstances: sometimes Unit will restart the send faxes when Unit name has been decided with the Japanese character string that is in Fax TX Preparation at RUI (Remote User Interface). Corrected the error, the problem is not often, because bhs displayed on the LCD to default to In English even when the user has set bhs to another.
Type the applicable
Versus File: V09. 14
File size: 17 MB
File name: MF4500_4400_Series_veruptool_V0914_EUen. dmg Download
Enter your product serial number in the field below and press 'Submit'